快速激光对中仪GO

Why complicate things? Using laser shaft alignment systems will make your everyday life so much easier, compared to using the traditional methods, such as dials, straight edges, etc. Fixturlaser GO is the latest addition to the Express Alignment product range, with the typical characteristics of a laser alignment system from Fixturlaser. It is an uncomplicated laser alignment tool for every maintenance professional who is concerned about the machines’ length of life.

Measuring and Aligning with Fixturlaser GO

Continue by rotating the shafts to the 3 or 9 o’clock position for adjustments in the horizontal direction. Once again, the angle guide will help you with reaching the right position. Move the machine until the values for both angular and parallel alignment are within tolerance, where the arrows again help out with which direction to choose.Complete the laser alignment process by rotating the shafts back to the 12 or 6 o’clock position to verify that the machine’s alignment status is within tolerance. To confirm the result, redo the measurement.

The Fixturlaser GO Software Package

Fixturlaser GO Features

Several of its features are adopted from the innovative Fixturlaser XA system, which will reduce the time spent on pre-alignment actions, measurement registration, performing the actual alignment, remeasuring to make certain that you have a correctly aligned machine; and, finally, documenting the measurement data.

The pre-mounted fixtures speed up mounting and packing of the fixtures.

The CCD technology used in the measurement units’ extra large detector area (30 mm) minimizes or, in most cases, eliminates the need for rough alignment. This technology also makes it possible to suppress ambient light and it rejects side spots that might interfere with the
accuracy of the measurement values.

Line laser combined with the CCD, renders the laser adjustment easier than ever. The measurement units will always be in the right position sideways, and vertical adjustments are easily done by unsnapping the measurement units’ snap-on fixtures.

The three LED lights on the display unit indicate whether the couplings are within tolerance (green light), within double tolerance (orange light), or out of double tolerance (red).

Other characteristics facilitating the handling of the system are the icon based user interface, a typical Fixturlaser trademark, now used in our systems for more than 15 years.

The measurements can be transferred to a PC by connecting the display unit to the PC's USB connection. When connected the display unit appears as a mass storage device in your PC. Files are then easily transferred to a folder in the PC.